Understanding the sources and composition of the incremental excess of fine particles across multiple sampling locations in one air shed

Well-designed health studies and the development of effective regulatory policies need to rely on an understanding of the incremental differences in particulate matter concentrations and their sources. Although only a limited number of studies have been conducted to examine spatial differences in sources to particulate matter within an air shed, routine monitoring data can be used to better understand these differences. Measurements from the US EPA Chemical Speciation Network （CSN） collected between 2002-2008 were analyzed to demonstrate the utility of regulatory data across three sites located within 100 km of each other. Trends in concentrations, source contribution, and incremental excesses across three sites were investigated using the Positive Matrix Factorization model. Similar yearly trends in chemical composition were observed across all sites, however, excesses of organic matter and elemental carbon were observed in the urban center that originated from local emissions of mobile sources and biomass buming. Secondary sulfate and secondary nitrate constituted over half of the PM2.5 with no spatial differences observed across sites. For these components, the excess of emissions from industrial sources could be directly quantified. This study demonstrates that CSN data from multiple sites can be successfully used to derive consistent source profiles and source contributions for regional pollution, and that CSN data can be used to quantify incremental differences in source contributions of across these sites. The analysis strategy can be used in other regions of the world to take advantage of existing ambient particulate matter monitoring data to better the understanding of spatial differences in source contributions within a given air shed.     

Ecosystem Impacts of Geoengineering: A Review for Developing a Science Plan

Geoengineering methods are intended to reduce climate change, which is already having demonstrable effects on ecosystem structure and functioning in some regions. Two types of geoengineering activities that have been proposed are: carbon dioxide (CO(2)) removal (CDR), which removes CO(2) from the atmosphere, and solar radiation management (SRM, or sunlight reflection methods), which reflects a small percentage of sunlight back into space to offset warming from greenhouse gases (GHGs). Current research suggests that SRM or CDR might diminish the impacts of climate change on ecosystems by reducing changes in temperature and precipitation. However, sudden cessation of SRM would exacerbate the climate effects on ecosystems, and some CDR might interfere with oceanic and terrestrial ecosystem processes. The many risks and uncertainties associated with these new kinds of purposeful perturbations to the Earth system are not well understood and require cautious and comprehensive research.     

College and university environmental programs as a policy problem (part 2): strategies for improvement

Environmental studies and environmental sciences programs in American and Canadian colleges and universities seek to ameliorate environmental problems through empirical enquiry and analytic judgment. In a companion article (Part 1) we describe the environmental program movement (EPM) and discuss factors that have hindered its performance. Here, we complete our analysis by proposing strategies for improvement. We recommend that environmental programs re-organize around three principles. First, adopt as an overriding goal the concept of human dignity??defined as freedom and social justice in healthy, sustainable environments. This clear higher-order goal captures the human and environmental aspirations of the EPM and would provide a more coherent direction for the efforts of diverse participants. Second, employ an explicit, genuinely interdisciplinary analytical framework that facilitates the use of multiple methods to investigate and address environmental and social problems in context. Third, develop educational programs and applied experiences that provide students with the technical knowledge, powers of observation, critical thinking skills and management acumen required for them to become effective professionals and leaders. Organizing around these three principles would build unity in the EPM while at the same time capitalizing on the strengths of the many disciplines and diverse local conditions involved.     

Statistical Models to Predict and Assess Spatial and Temporal Low‐Flow Variability in New England Rivers and Streams

In the northern hemisphere, summer low flows are a key attribute defining both quantity and quality of aquatic habitat. I developed one set of models for New England streams/rivers predicting July/August median flows averaged across 1985–2015 as a function of weather, slope, % imperviousness, watershed storage, glacial geology, and soils. These models performed better than most United States Geological Survey models for summer flows developed at a statewide scale. I developed a second set of models predicting interannual differences in summer flows as a function of differences in air temperature, precipitation, the North Atlantic Oscillation (NAO) index, and lagged NAO. Use of difference equations eliminated the need for transformations and accounted for serial autocorrelations at lag 1. The models were used in sequence to estimate time series for monthly low flows and for two derived flow metrics (tenth percentile [Q10] and minimum 3‐in‐5 year average flows). The first metric is commonly used in assessing risk to low‐flow conditions over time, while the second has been correlated with increased probability of localized extinctions for brook trout. The flow metrics showed increasing trends across most of New England for 1985–2015. However, application of summer flow models with average and extreme climate projections to the Taunton River, Massachusetts, a sensitive watershed undergoing rapid development, projected that low‐flow metrics will decrease over the next 50 years.     

Feasible conditions for Japanese woody biomass utilization

Environmental Science and Pollution Research - There is an abundance of woody biomass in Japan. However, its economic feasibility is limited. There have been several discussions on whether...     

Measurement of Ozone Levels by Ship Along the Eastern Shore of Lake Michigan

The U.S. Environmental Protection Agency (EPA), in cooperation with the Toronto Harbour Commissioners (THC), conducted a Superfund Innovative Technology Evaluation (SITE) demonstration of the THC Soil Recycle Treatment Train. The treatment train consists of three technologies operated in sequence: a soil wash process, a metals removal process, and a biological treatment process. The THC conducted an extensive demonstration of the treatment train at a 55 tons per day pilot plant in order to evaluate an approach for remediation of industrial/commercial sites that are situated in the Toronto Port Industrial District (PID). Three soils were processed during the THC demonstration. The EPA SITE demonstration project examined, in detail, soil processing from one of the sites being evaluated as part of the overall THC project. Contaminants included organic compounds and heavy metals. It has been estimated by THC that as much as 2,200,000 tons of soil from locations within the PID may require some form of treatment due to heavy metal and/or organic contamination that resulted from various industrial processing operations. The objective of the SITE demonstration was to evaluate the technical effectiveness of the process in relation to THC’s target criteria.

Gravel and sand that met the THC target criteria for medium to fine soil suitable for industrial/commercial sites was produced. The fine soil from the biological treatment process did not meet the target level of 2.4 ppm for benzo(a)pyrene. However, there was a significant reduction in polynuclear aromatic hydrocarbon (PAH) compounds. The metals removal process achieved reductions of greater than seventy percent for copper, lead, nickel, and zinc.     

Effects of Sulfur Dioxide and Nitric Oxide on Mercury Oxidation and Reduction under Homogeneous Conditions

Abstract

This paper is particularly related to elemental mercury (Hg⁰) oxidation and divalent mercury (Hg²⁺) reduction under simulated flue gas conditions in the presence of nitric oxide (NO) and sulfur dioxide (SO₂). As a powerful oxidant and chlorinating reagent, Cl₂ has the potential for Hg oxidation. However, the detailed mechanism for the interactions, especially among chlorine (Cl)-containing species, SO₂, NO, as well as H₂O, remains ambiguous. Research described in this paper therefore focused on the impacts of SO₂ and NO on Hg⁰ oxidation and Hg²⁺ reduction with the intent of unraveling unrecognized interactions among Cl species, SO₂, and NO most importantly in the presence of H₂O. The experimental results demonstrated that SO₂ and NO had pronounced inhibitory effects on Hg⁰ oxidation at high temperatures when H₂O was also present in the gas blend. Such a demonstration was further confirmed by the reduction of Hg²⁺ back into its elemental form. Data revealed that SO₂ and NO were capable of promoting homogeneous reduction of Hg²⁺ to Hg⁰ with H₂O being present. However, the above inhibition or promotion disappeared under homogeneous conditions when H₂O was removed from the gas blend.     

Extraction of Mercury from Groundwater Using Immobilized Algae

Bio-Recovery Systems, Inc. conducted a project under the Emerging Technology portion of the United States Environmental Protection Agency’s (EPAs) Superfund Innovative Technology Evaluation (SITE) Program to evaluate the ability of immobilized algae to adsorb mercury from contaminated groundwater in laboratory studies and pilot-scale field tests. Algal biomass was incorporated in a permeable polymeric matrix. The product, AlgaSORB, packed into adsorption columns, exhibited excellent flow characteristics, and functioned as a “biological” ion exchange resin. A sequence of eleven laboratory tests demonstrated the ability of this product to adsorb mercury from groundwater that contained high levels of total dissolved solids and hard water components. However, use of a single AlgaSORB preparation yielded nonrepeatable results with samples collected at different times of the year. The strategy of sequentially extracting the groundwater through two columns containing different preparations of AlgaSORB was developed and proved successful in laboratory and pilot-scale field tests. Field test results indicate that AlgaSORB could be economically competitive with ion exchange resins for removal of mercury, with the advantage that hardness and other dissolved solids do not appear to compete with heavy metals for binding capacity.